Slemani Construction Laboratory is a full-service construction materials and geotechnical testing laboratory serving the Kurdistan Region and Iraq. We test everything that goes into a project — concrete, asphalt, cement, rebar, aggregate, tiles, soil, polyethylene and more — and deliver the data that keeps every structure safe, compliant and built to last.
Test methods covering every major construction material.
From the first borehole on site to the final tile on the wall — we test concrete, asphalt, soil, cement, rebar, aggregate, polyethylene, tiles, curbstone, chemical aggressivity and much more.
Site investigation, borehole drilling, SPT and sampling for foundations, retaining walls and slope stability studies.
Cube crushing, cylinder testing, job mix design (JMD), slump, density, air content and full mix-design verification to ASTM and Iraqi standards.
Marshall stability, maximum theoretical density (Gmm), bitumen extraction and recovery, penetration, softening point, and full volumetric analysis.
Classification, Atterberg limits, Proctor compaction, consolidation, direct shear, triaxial, CBR and full grain-size distribution.
Cement physical and chemical testing, rebar tensile and bend tests, and reinforcement quality verification.
Tile dimensional and flexural testing, curbstone compressive strength, water absorption, and finish quality control.
HDPE and polyethylene pipe, membrane and geosynthetic testing for thickness, density, tensile strength and weld quality.
Sulphate, chloride, pH, total dissolved solids and organic content — critical for concrete durability and steel corrosion protection.
On-site core extraction and compressive strength testing of hardened concrete cores for existing structures and quality audits.
Every issued report — geotechnical or materials — carries a QR-code verification link and is signed by our technical team.
Slemani Construction Laboratory has long supported construction projects across the Kurdistan Region and Iraq. Our engineers, chemists and laboratory technicians work to recognised international standards, using calibrated equipment and strict quality-control procedures — for everything from single-site residential builds to major infrastructure.
Our laboratory works to the same standards you'll find on construction sites in Europe, the Gulf and North America.
Technical competence, impartiality and valid results: our methods, equipment, staff and records are controlled to the international standard for testing laboratories.
Every request follows a documented process, from receipt and testing to review, approval and release, with continual improvement.
Every soil, concrete, asphalt and materials test follows the relevant ASTM, British Standard, or Iraqi Standard (IS) method — whichever the project specification requires.
All instruments are regularly serviced and calibrated, with full traceability records on file.
We have no commercial interest in your project beyond delivering accurate, defensible results.
Every report is QR-stamped. Authorities and clients can verify authenticity with a phone scan.
Standard tests are usually reported within a few working days, and urgent options are available.
Geotechnical engineers, chemists and technicians who understand what happens on a real construction site.
Settle your invoice securely by card or mobile wallet, from your phone or computer.
We never see or store your card details.
Log in to the client and staff portal to submit samples, track tests, and download signed geotechnical reports.